Pre-cutting disc-type gear shaper cutter with DIN 3972/III
2021-10-18 11:51:13
jiangxingTools
1240
Pre-cutting disc-type gear shaper cutter with DIN 3972/III
Tooth profile is according to DIN3972-3 standard
Module: m1-m6
Number of teeth: Z20-124
Pressure angle: 20°
Bore: 44.443mm
The standard gear shaping tools are manufactured from HSS M35, ASP2052 / S390 material with an Alcrona Pro coating. Here you will find the available models in the category disc-type shaper cutters DIN 3972/III. The stock shaper tools are available within a short space of time, and include a measurement.
相關文章
-
PA30° DIN5480 Involute Spline Hob with Module m4
PA30° DIN5480 Involute Spline Hob with Module m4Tooth profile：GB, DIN5480 standardMaterial：HSS M2, M... - G50/G55 High Speed Carbide Gear Hob with AT Coating
- PA20° Module m1.5 Standard Involute Gear Hobber Cutter
- Spline gear hob with Involute flanks to DIN 5480
- PA20° Module m1.25 Standard Involute Gear Cutter Hob
- PA20° Pre-shaving Gear Hobber with Module m2.5
- Shank Type Worm Wheel Hob with Module m2
