G50/G55 High Speed Carbide Gear Hob with AT Coating
2023-04-24 14:27:28
jiangxingTools
15
G50/G55 High Speed Carbide Gear Hob with AP Coating
base material: carbide G50 or G55
bore type gear hobs, BALINT ALTESA coating
solid carbide hobs for high speed gear hobbing, high hardness optimal selection.
recommended linear speed 150m/in-220m/min
recommended hob feed 0.15-0.35mm/r
oil cooling cutting environment
recommended hardness of processed material from HRC 45°-HRC 62° (secondary fine hobbing is recommended for HRC 56° to HRC 62°）
accuracy class DIN AA, AAA
solid carbide gear hob cutter with bore sizes: 8mm, 10mm,13mm, 16mm, 22mm, 27mm,32mm
tooth profile: DIN3972 stanard, for finishing cut
相關文章
-
Profile Modifications for Gear Shaper Cutter
Profile Modifications for Gear Shaper Cutter1, Corner radius2, Chamfer or semi-topping3,Protuberance... - PA20° Profile DIN3972 Standard Gear Hobbing Cutter with Module m2.25
- PA20° PCD 100mm Pre-shaving Gear Shaper Cutter with Module m1.25~m6
- PA20° Standard Gear Milling Cutter with Module m0.35
- PA20° Profile DIN3972 Standard Pre-grinding Gear Cutting Hob with Module m2.75
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hobber Cutter with Module m2.5
- PA20° Standard Involute Gear Milling Cutter with Module m1.75
