• News and information

    News
    GB STD PCD25mm/38mmTaper Shank Gear Shaping Cutter
    GB STD PCD25mm/38mmTaper Shank Gear Shaping Cutter

    GB STD PCD25mm/38mm Taper Shank Gear Shaping CutterModule: M1-m4,PA20Morse Taper: No.2, No.3Material...

    DP Bowl-Shape PCD100mm Straight Tooth Pinion Cutter
    DP Bowl-Shape PCD100mm Straight Tooth Pinion Cutter

    DP Bowl-Shape PCD100mm Straight Tooth Pinion CutterModule: DP4-DP26,AP20Profile to GB/T6081 standard...

    GB Standard Disk Type Module Gear Shaving Cutter
    GB Standard Disk Type Module Gear Shaving Cutter

    GB Standard Disk Type Module Gear Shaving CutterStandard: GB/T6081standard profileModule: m1-m8, PA2...

    DIN3972 Standard Module Involute Gear Hob Cutter
    DIN3972 Standard Module Involute Gear Hob Cutter

    DIN3972 Standard Module Gear Hob Cutterfor spur and helical gears to module pitch20° pressure angleb...

    Gear Hobs for Straight Splines
    Gear Hobs for Straight Splines

    Gear Hobs for Straight Splines1, Spline Data: 1),No. of splines; 2),Spline width; 3),Out side dia. ;...

    Sprocket Hobs
    Sprocket Hobs

    Sprocket Hobs1,Sprocket Data: 1), Chain pitch,              ...

    Technical Information for Hobs
    Technical Information for Hobs

    Technical Information for Hobs1,Simulation of Tooth Profile2,Certificate of Hob QualityJiangxing Too...

    Comparision of Gear and Hob Class
    Comparision of Gear and Hob Class

    Comparision of Gear and Hob Class1,Comparision of Gear Class2,Comparision of Hob Class...

    Comparing composition of raw material for hobs
    Comparing composition of raw material for hobs

    Comparing composition of raw material for hobsHigh speed steels may be divided into normal high spee...

    Information required when ordering shaving cutters
    Information required when ordering shaving cutters

    Information required when ordering shaving cutters1,complete gear data: 1) module, 2) number of teet...

    Information required when ordering shaper cutters
    Information required when ordering shaper cutters

    Information required when ordering shaper cutters1, Quantity of shaper cutter2, Type of cutter - Dis...

    Information required when ordering gear hobs
    Information required when ordering gear hobs

    Information required when ordering gear hobsGEAR DATA? Normal module/OP? No. of teeth? Normal pressu...

    Strong point of Jiangxing Tool
    Strong point of Jiangxing Tool

    Strong point of Jiangxing Tool1,Gear hobbing tools specialist manufacturer2,Accumulation of expertis...

    Hob Cutting Condition
    Hob Cutting Condition

    Hob Cutting ConditionCutting speed V=ΠDN/1000(m/min)Π: Circle Ratio D(Hob OD), N(RPM)A factor of cut...

    The Method of Hob Computation
    The Method of Hob Computation

    The Method of Hob ComputationNormal pitch=Mn x Π(Mn: Normal Module)Axial pitch=Mn/cos LALead=Axial p...

    Hob specification criteria
    Hob specification criteria

    Hob specification criteriaRaw material for tooth: HSS, PM and CarbideStructure-Solid Hob, Built-up H...

    Heat-treatment Hardness Standard for Hobs
    Heat-treatment Hardness Standard for Hobs

    Heat-treatment Hardness Standard for HobsJiangxing Tool's high performance solid carbide or high...

    Considerations when selecting hobs
    Considerations when selecting hobs

    Considerations when selecting hobs1, Bore Dia.: using standard table(caution: tolerance of inch and...

    Protuberance hobs
    Protuberance hobs

    Protuberance hobsHobs with protuberance are roughing cutters whose profile differs from the standard...

    Hob Coating
    Hob Coating

    Hob CoatingA hard coating with a thickness of 2-3um increase the life of the hobs, or permits higher...

    Hob Materials
    Hob Materials

    Hob Materialsthe standard material is the high speed steel EM2, EM35 and EM42. For higher cutting sp...

    High Precision Module Gear Hobs
    High Precision Module Gear Hobs

    High Precision Module Gear HobsAs a professional manufacturer of HSS gear cutting tools,we are suppl...

    Features of Gear Cutting Hobs
    Features of Gear Cutting Hobs

    Features of Gear Cutting Hobs1, Cutting action for module gear hobbing,2, Inclination angle of gear...

    Plunge Cut Shaving Cutter
    Plunge Cut Shaving Cutter

    Plunge Cut Shaving Cutterwe are supplying quality module and dp shaving cutters for customers, eithe...

    免费69精品国产成人无码_亚洲成A人片在线播放器_欧美一区二区三放荡人妇_国产在线观看无码免费Aa