High-Speed Steel E M35
2022-03-12 15:55:58
jiangxingTools
730
High Speed Steel E M35
EM35 contains cobalt for increased hot hardness. The composition of EM35 offers a good combination of toughness and hardness. EM35 has a good machinability
Chemical composition: C-0.93, Cr-4.2, Mo-5.0, W-6.4, Co-4.8, V-1.8
Standard: Europe: HS 6-5-2-5 , USA: AISI M35, Germany: 1.3243, Sweden: SS2723, France: AFNOR Z90WDKCV6.5.5.4.2, Japan: JIS SKH55, UK: BM35
The steel grade is a perfect substrate material for PVD coating. If nitriding is requested, a small diffusion zone is recommended but avoid compound and oxidized layers.
相關文章
-
PA20° DIN3972 Standard Gear Hob with Module m12
PA20° DIN3972 Standard Gear Hob with Module m12Material：HSS M2, M35Tooth profile is according to DIN... - Comparision of Gear and Hob Class
- RS35 Roller Chain Sprocket Hob with Pitch 9.525 x Roller Dia. 6.35
- Taper Shank Type Shaper Cutters with DIN 1828
- Timing Pulley Hob for STS 5M
- PA20° Inserted Blade Gear Hob with Module m24
- Tip Chip Thickness for Hobs
