Defination of Basic Hob Profiles
2021-11-01 11:57:49
jiangxingTools
947
Defination of Basic Hob Profiles
The basic hob profile is the normal sectional profile of an imaginary tooth rack, which meshes with the workpiece teeth under the following conditions:
1), The basic profile line of the rack rolls on a defined pitch circle diameter of the workpiece.
2), The pitch of the rack is equal to the pitch on the pitch circle diameter,
3), Meshing with the workpiece takes place:
Standardized basic hob profiles are shown in: DIN 3972 and DIN 58412 standard
相關文章
-
PA20° Profile DIN3972 Standard Pre-grinding Gear Cutter Hob with Module m3.75
PA20° Profile DIN3972 Standard Pre-grinding Gear Cutter Hob with Module m3.75Tooh profile is accordi... - K40,K42, K44 Carbide Standard Gear Hob with Topping or Non-Topping
- Involute Spline Hob with PA45°
- HSS gear hob cutter with relief ground DIN 8002 B
- PA20° Pre-shave Gear Hob with Module m1
- PA20° Profile DIN3972 Standard Gear Hobber Cutter with Module m8
- Pre-grinding Rectangle Spline Hob
